REPAIR CRACKS AND SPALLS IN 10 MINUTES
Now you can repair cracks and spalls to a smooth finish in a fraction of
the time it takes with ordinary products.
Roadware 10 Minute Concrete
Mender™
is a
revolutionary new two-part hybrid urethane for repairing concrete. It’s
nearly water thin for deep penetration and it won’t pop out like epoxy
because it never gets brittle. .
Great for all industrial floors
Roadware 10 Minute Concrete Mender™
is extremely tough and will withstand even the harshest punishment. Great
for freezers... may be applied at temperatures as low as -20° F with
excellent results. High chemical resistance, perfect for containment
areas. Re-coat in 10 minutes, will accept primers and industrial coatings
in just 10 minutes after application. Now prep-work and coatings can be
applied in the same day!
Roadware 10 Minute Concrete Mender™
is a nearly water-thin two-part hybrid polymer that flows into sand filled
cracks and spalls to form a tough 4500psi polymer concrete that fully
cures in 10 minutes at room temperature.
Roadware 10 Minute Concrete Mender™
stays in place due to the Microdoweling™ action of Roadware polymers
flowing into the pores of the concrete. 10 Minute Concrete Mender will
remain in place under the heaviest traffic conditions and will never get
brittle like many high-strength epoxies or concrete patches. 10 Minute
Concrete Mender meets USDA guidelines and is available in 21oz. cartridge
sets or bulk gallon kits.
For repairs to control joints, high movement areas, and outdoors areas, we
recommend
Roadware Flexible Cement II™.
This load bearing elastermaric polymer concrete will stretch 40% to
accommodate thermal or shock movement.
For before and after photos of a Roadware
application, click here.
C&C Construction Company, Inc. is an authorized installer
and distributor of
Roadware 10 Minute Concrete Mender™.
